manualshive.com logo in svg

Avaya UC, Installation And Maintenance Manual, Page: 32 / 102

Share
Download
Avaya UC Installation And Maintenance Manual Download Page 32

Unified Communications Module Installation and Maintenance

Page 32

15-601011 Issue 03l (28 August 2012)

IP Office

3.2 IP Office Configuration

When a new Unified Communications Module running Voicemail Pro is added to a new system, the system configuration is
automatically adjusted to use that voicemail server. However, this should be confirmed by checking the Voicemail Type
and Voicemail IP Address settings in the IP Office configuration. If the switch has previously been configured for a specific
voicemail server address, those settings are not automatically changed and will need to be manually updated.

If a different role is intended for the voicemail server (see 

Small Community Networks

), refer to the Voicemail Pro

Installation Manual. This section only covers voicemail server support for the IP Office in which it is installed. 

1. Start IP Office Manager and receive the configuration from the IP Office system. 

2. Select 

 System. 

3. Select the Voicemail tab. 

 

·

The Voicemail Type should be set to Voicemail Lite/Pro. 

·

The Voicemail IP Address of 169.254.0.2 is an 

internal IP address

 used for connection between the IP

Office and the Unified Communications Module. 

·

In the Voicemail Channel Reservation section, the number of channels will be 4 plus any additional channels
licensed. The Unified Communications Module can be licensed for up to 20 ports.

4. If any changes have been made, save the changes back to the IP Office system. 

11

15

Summary of Contents for UC







































































































Reviews:

No comments