Unified Communications Module Installation and Maintenance
Page 19
15-601011 Issue 03l (28 August 2012)
IP Office
Module Installation: Inserting the Module
2.5 Initializing the Module Services
Following installation and start up of the newly installed module, the services provided by the module need to be started
and initialized. This is done via web browser access to the module.
1. From a client PC, start the browser and enter http:// followed by the LAN1 IP address of the IP Office system and
:7070. For example http://192.168.42.1:7070.
·
The IP Office system's LAN1 address is used just for this initial configuration. During this process, you will set
IP address details for the Unified Communications Module that are then used for future access to the card. Note
that only the LAN1 IP address should be used for this process, not the LAN2 IP address.
2. The Unified Communications Module login page is displayed. The default name and password are webcontrol and
web.
3. Click Login. The menu for initial setup is displayed.
4. Click Next. If you accept the license, select I Agree and click Next.