Unified Communications Module Installation and Maintenance
Page 71
15-601011 Issue 03l (28 August 2012)
IP Office
Server Menus: Settings
6.4.2 System
These settings allow the IP address and time settings specified during installation to be changed.
Network
·
Network Interface
This field is fixed to eth0.1.
·
Host Name
Sets the host name that the Unified Communications Module should use. This setting requires the local network
to support a DNS server. Do not use localhost.
·
Use DHCP
If selected, the IP address, subnet mask and default gateway information is obtained by the server making
DHCP requests. The related fields are greyed out and cannot be set manually, instead they show the values
obtained in response to the DHCP request.
·
IP Address
Displays the IP address set for the server. If DHCP is not being used, the field can be edited to change the
setting. The Unified Communications Module is physically connected to the LAN1 network of the system and
needs to have an address on that subnet. See
IP Address Notes
.
·
Subnet Mask
Displays the subnet mask applied to the IP address. If DHCP is not being used, the field can be edited to
change the setting.
·
Default Gateway
Displays the default gateway settings for routing. If DHCP is not being used, the field can be edited to change
the setting.
·
DNS
Enter the address of the primary DNS server. This option is greyed out if the address of the DNS server is set
to be obtained from the DHCP server (see below).
·
Automatically obtain DNS from provider
This setting is only used if Use DHCP is also selected. If selected, the server will attempt to obtain DNS server
details from the DHCP server.
15