manualshive.com logo in svg

Avaya UC, Installation And Maintenance Manual, Page: 64 / 102

Share
Download
Avaya UC Installation And Maintenance Manual Download Page 64

Unified Communications Module Installation and Maintenance

Page 64

15-601011 Issue 03l (28 August 2012)

IP Office

6.2 Logs

The logs menu is divided into two sub-menus:

·

View

 

View the current log files for the server and the application services hosted by the server. 

·

Download

 

Create and download archive files of existing log records. 

6.2.1 View

This page of the web browser interface can be used to view application logs and audit log records. 

·

Application Log 
This table lists the log records for a selected server application supported by the Unified Communications Module.
The Application drop-down is used to select which records are shown. Clicking on a column header sorts the
records using that column. The records shown are all those generated since the last time the log files were archived
using the Create Archive command on the 

Logs | Download

 page. For Voicemail Pro the level of log

information output is set through the Debug section of the 

Settings | General

 menu. For one-X Portal for IP

Office the level of log information output is set through the applications own administration menus, not through the
Unified Communications Module menus.

·

Audit Log 
This table lists the actions performed by users logged in through the IP Office Application Server's web browser
interface. Clicking on a column header sorts the records using that column. 

64

65

65

69

Summary of Contents for UC







































































































Reviews:

No comments