Avaya Partner 18 Connection Manual Download

Page: 255 / 318

Using AT&TConnect

Select the appropriate information, and then select the Continue button.

If you do not have a PARTNER II Release 3.0 or later system, the

AT&TConnect Setup - Line Labels dialog box appears. In this case,
proceed to step 4.

If you have a PARTNER II Release 3.0 or later system, the

AT&TConnect Setup - Caller ID Inspect Feature dialog box appears.

Select the Continue button.

The AT&TConnect Setup - Line Labels dialog box appears.

Select the Continue button.

The AT&TConnect Setup dialog box appears.

Select the OK button.

Changing the Labels of the Line Buttons

To change a line button label:

✏

NOTE:

You cannot change line button labels while PassageWay
applications other than AT&TConnect are running.

Select

Configure System. . .

from the Setup menu.

The AT&TConnect Setup - System Configuration dialog box appears.

7-8

Summary of Contents for Partner 18































































































































































































































































































































Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands

Avaya Partner 18, Connection Manual

Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands