Avaya Partner 18 Connection Manual Download

Page: 195 / 318

Using AT&TSet

To print labels:

Select

Print Labels. . .

from the File menu.

The Print Labels dialog box appears.

Select the checkbox of the location where you want the labels printed
on the button label form. If you have an MLS-34D, you can set AT&TSet

to print one or two sets of labels. If you have an MLS-18D, MLS-12D,

MLS-12, or MLS-6, you can set AT&TSet to print one to four sets of
labels.

Tape the sheet of labels to an 8.5 inch by 11.5 inch piece of paper, and
place this in your printer.

4 .

Select the OK butlon.

The button labels are printed.

Printing the Personal Speed Dial List

AT&TSet enables you to print your Personal Speed Dial List. This print out

includes the following information for each speed dial code that is currently

programmed:

■

speed dial code number

■

number to be dialed

■

label

✏

NOTE:

Personal Speed Dial Lists are not available on PARTNER
Release 3.0.

5-18

Summary of Contents for Partner 18































































































































































































































































































































Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands

Avaya Partner 18, Connection Manual

Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands