Avaya Partner 18 Connection Manual Download

Page: 175 / 318

Using AT&TCall

Always on Top

Keeps the AT&TCall window on top of all other open windows, including the

active window. This prevents the AT&TCall window from being obscured by
other windows.

Accessories

The Accessories menu contains the following options:

■

Call Log

■

Dialpad

■

Timer

Call Log

Enables you to access the Call Log, which contains information on all of the

calls you made from an AT&TCall file.

Dialpad

Enables you to access the Dialpad window. Using the Dialpad window, you

can place calls from the AT&TCall file.

Timer

Displays the Timer window, which contains a timer that immediately starts
running.

4-82

Summary of Contents for Partner 18































































































































































































































































































































Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands

Avaya Partner 18, Connection Manual

Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands