Avaya Partner 18 Connection Manual Download

Page: 46 / 318

Installing and Setting Up PassageWay Solution

13.

Perform one of the following steps:

— If you want to customize the Line Labels, perform the following

steps:

Select the label that you want to change.

The AT&TConnect Setup - Edit Line Label dialog box
appears.

Enter a new label and select the OK button.

Proceed to step 14.

— If you do not want to modify the Line Labels, proceed to step 14.

14.

Select the Continue button.

The AT&TConnect Setup - Line Label dialog box closes, and the
AT&TConnect Setup dialog box appears.

Figure 2-15. AT&TConnect Setup
Dialog Box

2-21

Summary of Contents for Partner 18































































































































































































































































































































Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands

Avaya Partner 18, Connection Manual

Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands