Avaya Partner 18 Connection Manual Download

Page: 154 / 318

Using AT&TCall

When you are finished, select the OK button.

The Edit labels dialog box disappears, and your changes are displayed
on the card.

Creating a New Card

To create a new card:

2 .

Select the New Card button.

field.

The New Card window appears, and the cursor is located in the first

Enter the appropriate information in each field that you use.

When you are finished entering information in this card, select the Add
Card button.

The New Card window doses, the labels for the new card appear in List
field, and the information for the new card is displayed.

Deleting a Card

To delete a card:

✏

NOTE:

When you delete an existing card, all Quick Dials associated with

that card are deleted.

Select the card you want to delete.

The selected card is displayed.

4-61

Summary of Contents for Partner 18































































































































































































































































































































Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands

Avaya Partner 18, Connection Manual

Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands