Avaya Partner 18 Connection Manual Download

Page: 134 / 318

Using AT&TCall

Enter

attcall.tpl

in the Filename box and select the OK button.

The template is now saved. Every new file you open will now contain
the attributes that you specified in your template.

Creating a New AT&TCall File

To create a new AT&TCall file:

Select New from the File menu.

A new, empty AT&TCall file with the title "(UNTITLED. DEX)" appears.
When you save this file, the system will prompt you to name the file.

Enter your information in this file.

When you are finished working and want to save this file, select

Save

As. . .

from the File menu.

The system prompts you to name this file.

Enter the file name in the File Name box, and then select the OK

button.

The name of the file appears in the title bar of the window.

Dialing a Phone Number with the Dialpad

To dial a phone number with the Dialpad:

System Phone

Select the Dialpad button.

The Dialpad window appears.

4-41

Summary of Contents for Partner 18































































































































































































































































































































Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands

Avaya Partner 18, Connection Manual

Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands