Avaya Partner 18 Connection Manual Download

Page: 32 / 318

Installing and Setting Up PassageWay Solution

Installing the PassageWay Adapter

The PassageWay adapter provides an interface between the serial port on
your PC and the Line jack on your telephone, enabling you to access the

PARTNER system from your PC. The PassageWay adapter has a DB-25

connector for 25-pin serial ports. If you have a 9-pin serial port on your PC,

use the 9-pin to 25-pin adapter included with PassageWay.

✏

NOTE:

Do not install the PassageWay adapter while you are active on a
call.

To install the PassageWay adapter, perform the following steps:

Turn off your PC.

Unplug the line cord from your telephone.

Connect the line cord to the jack labeled "Line" on the PassageWay
adapter.

2-7

Summary of Contents for Partner 18































































































































































































































































































































Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands

Avaya Partner 18, Connection Manual

Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands