Avaya Partner 18 Connection Manual Download

Page: 159 / 318

Using AT&TCall

To use the Timer:

When you want to start the timer, select the Timer button.

The Timer window appears and immediately starts keeping time. The
Timer measures time in hours, minutes, and seconds. To reset the

timer, select the Reset button. To stop the timer, select the Stop button.
To restart the timer after it has been stopped, select the Start button.

Figure 4-34. Timer

Window

When you are finished using the timer, select

from the Control-

menu box of the Timer window.

Quick Dial Tasks

This section describes the tasks you will perform when using Quick Dials in an

AT&TCall file.

Accessing Information for a Quick Dial

To view the information for a Quick Dial:

Press and hold down

[ SHIFT ]

, and then click on the Dial button of the

Quick Dial in which you are interested.

The Quick Dial information dialog box appears. This dialog box presents
the label and phone number for this Quick Dial.

4-66

Summary of Contents for Partner 18































































































































































































































































































































Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands

Avaya Partner 18, Connection Manual

Search results

Summary of Contents for Partner 18

Reviews:

Related manuals for Partner 18

Brands by name

Popular brands