manualshive.com logo in svg

Avaya J169, Installing And Administering

The Avaya J169 user manual is essential for maximizing the functionality of your J169 phone. Download this comprehensive manual for free from our website to explore all the features, settings, and troubleshooting tips to enhance your communication experience. Start benefiting from your Avaya J169 by accessing the manual at manualshive.com.

Share
Download
background image

If an HTTP backup or restore operation requires authentication and the realm in the challenge
matches the stored realm, the phone uses the stored credentials to respond to the challenge
without prompting the user. However, if the stored credentials are null, or if the realms do not
match, or if an authentication attempt using the stored credentials fails, the Status Line of the IP
Deskphones or the Prompt Line for all other IP Deskphones display an HTTP Authentication or an
HTTP Authentication Failure interrupt screen:

 Enter authentication credentials

.

New values replace the stored authentication and realm values:

• When HTTP authentication for backup or restore succeeds

• If the userid, password, or realm used differs from those values that are stored in the phone

• If HTTP authentication fails, the user is prompted to enter new credentials.

Note:

The HTTP basic authentication method is not secure. Use this method only for compatibility
with file servers that require authentication. For example, IIS 7.0 and later require
authentication for PUT requests. Volume settings for the ringer and the speaker are persistent
after reboot and backup/restore.

Note:

Users can request a backup or restore using the 

Advanced Options

 > 

Backup/Restore

screen, as described in the user guide for their specific deskphone model.

Related links

Server Administration

 on page 82

About IPv4 and IPv6 operation

Important:

Avaya does not support IPv6 for the general market, and makes the software available to a

specific set of customers. Any additional limitation or bugs discovered within this release will

be considered for resolution in future major releases.

From Release 6.0 onwards, Internet Protocol (IP) operation determination follows this order:

• If NVVPNMODE parameter value is set to 1 (Yes) only IPv4 operation is enabled.
• If NVVPNMODE is set to 0 (No), the IPv6 status IPV6STAT parameter is checked to see if

IPv6 is allowed; if set to 0 (No) then only IPv4 operation is enabled.

• If IPV6STAT is set to 1 (support IPv6), then the DHCPSTAT parameter is checked:

- If DHCPSTAT is set to 1 (use DHCPv4 only) then IPv4 only is enabled. But if an IPv6

address was manually programmed, dual-stack operation is enabled.

- If DHCPSTAT is set to 2 (use DHCPv6 only) then IPv6 only is enabled. But if an IPv4

address was manually programmed, dual-stack operation is enabled.

- If DHCPSTAT is set to 3 (both IPv4 and IPv6 supported), then dual-stack operation is

enabled.

Administering your phone

May 2018

Installing and Administering Avaya J169/J179 IP Phone H.323

94

Comments on this document? [email protected]

Summary of Contents for J169












































































































































































































Reviews:

No comments

Related manuals for J169

D-Link DVG-5121SP Quick Information Manual preview
DVG-5121SP
Brand: D-Link Pages: 56
i.safe MOBILE IS730.2 Quick Start Manual Safety Instructions preview
IS730.2
Brand: i.safe MOBILE Pages: 49
i.safe MOBILE IS310.2 Quick Start Manual preview
IS310.2
Brand: i.safe MOBILE Pages: 37
Pantech Verizon Jest 2 User Manual preview
Verizon Jest 2
Brand: Pantech Pages: 182
Pantech Pursuit II User Manual preview
Pursuit II
Brand: Pantech Pages: 88
Pantech PG-1410 User Manual preview
PG-1410
Brand: Pantech Pages: 4
Pantech Pantech Perception User Manual preview
Pantech Perception
Brand: Pantech Pages: 202
Pantech G800 Setup Manual preview
G800
Brand: Pantech Pages: 3
Pantech Discover Guía Del Usuario preview
Discover
Brand: Pantech Pages: 120
Pantech DEL USUARIO PG-1610 User Manual preview
DEL USUARIO PG-1610
Brand: Pantech Pages: 79
Pantech AT&T Laser User Manual preview
AT&T Laser
Brand: Pantech Pages: 169
Pantech Verse Quick Start Manual preview
Verse
Brand: Pantech Pages: 42
Samsung SPH-A600 Series Manual Del Usuario preview
SPH-A600 Series
Brand: Samsung Pages: 111
NTT docomo L600i User Manual preview
L600i
Brand: NTT docomo Pages: 68
TCL TCL 30 5G Quick Start Manual preview
TCL 30 5G
Brand: TCL Pages: 18
T-Mobile KII0160 User Manual preview
KII0160
Brand: T-Mobile Pages: 212
Alcatel ONETOUCH 361A Quick Start Manual preview
ONETOUCH 361A
Brand: Alcatel Pages: 2
Blu DASH 4.0 User Manual preview
DASH 4.0
Brand: Blu Pages: 54

Brands by name

Popular brands

Load more brands