Avaya J169 Installing And Administering Download

Page: 183 / 203

The system displays the Downloads page.

9. In the

File

field, click the settings file and save the file at an appropriate location on the file

server.

Related links

Upgrading the device

on page 182

Upgrading the device manually

About this task

Use the Avaya-provided upgrade script files and the application files that are included in the zip

files to upgrade the phones. Ensure that all the files are together on the file server. Do not modify

the files. Use this procedure to download the latest version of the software to the file server.

Procedure

1. Stop the file server.

2. Specify the port settings for HTTP or TLS in the HTTPPORT or TLSPORT settings

respectively.

3. Perform a back up of all the current file server directories.

4. Copy the

46xxsettings.txt file

to a backup location.

5. Remove all the files in the download directory. This ensures that you do not have an

inappropriate binary or configuration file on the server.

6. Download the self-extracting executable file or the corresponding zip file.

7. Extract all the files.

8. Copy the

46xxsettings.txt file

to the download directory.

9. Check the

Readme

file for release-specific information.

10. Modify the

46xxsettings.txt file

as required.

11. Restart the HTTP/HTTPS server.

12. Reset the phone.

Related links

Upgrading the device

on page 182

Upgrading the device manually

May 2018

Installing and Administering Avaya J169/J179 IP Phone H.323

183

Comments on this document? [email protected]

Summary of Contents for J169












































































































































































































Search results

Summary of Contents for J169

Reviews:

Related manuals for J169

Brands by name

Popular brands

Avaya J169, Installing And Administering

Search results

Summary of Contents for J169

Reviews:

Related manuals for J169

Brands by name

Popular brands