manualshive.com logo in svg

Avaya J169, Installing And Administering, Page: 102 / 203

Share
Download
Avaya J169 Installing And Administering Download Page 102

• If the parameter is present in the downloaded 

46xxsettings.txt

 file, the phone uses the

parameter value specified in the file.

Parameter name

Default value

Description and value range

ADMIN_HSEQUAL

1

Handset Equalization alternative permission flag. Valid
values are:

1 = Use handset equalization that is optimized for
acoustic TIA 810/920 performance.

2 = Use handset equalization that is optimized for
electrical FCC Part 68 HAC telecoil performance.

Note:

This parameter will only have an effect on a phone if
the handset equalization has not been set by the
user or by the HSEQUAL local procedure.

AGCHAND

1

Automatic Gain Control status for handset, 0=disabled,
1=enabled.

Note:

This parameter applies only if the user has not changed
the Automatic Gain Control from the deskphone menu.
The changes made by the user are stored in the backup/
restore file as OPTAGCHAND, if BRURI has a valid
value. The value of the OPTAGCHAND parameter in the
backup/restore file takes precedence over the AGCHAND
parameter. User can use the Clear operation to reset the
configuration.

AGCHEAD

1

Automatic Gain Control status for headset, 0=disabled,
1=enabled.

Note:

This parameter applies only if the user has not changed
the Automatic Gain Control from the deskphone menu.
The changes made by the user are stored in the backup/
restore file as OPTAGCHEAD, if BRURI has a valid
value. The value of the OPTAGCHEAD parameter in the
backup/restore file takes precedence over the AGCHEAD
parameter. User can use the Clear operation to reset the
configuration.

AGCSPKR

1

Automatic Gain Control status for Speaker, 0=disabled,
1=enabled.

Note:

This parameter applies only if the user has not changed
the Automatic Gain Control from the deskphone menu.
The changes made by the user are stored in the backup/

Table continues…

Administering your phone

May 2018

Installing and Administering Avaya J169/J179 IP Phone H.323

102

Comments on this document? [email protected]

Summary of Contents for J169












































































































































































































Reviews:

No comments