Avaya J169 Installing And Administering Download

Page: 61 / 203

Trusted Push Server can be the same server as your WML server. Avaya recommends that

you restrict access to folders on the WML server that contain push content.

Note:

The system supports Push only in IPv4 mode. Your Web and push server configuration

must be compatible with the requirements mentioned in the

Avaya IP Deskphone Edition

for 9600 IP Telephones Application Programmer Interface (API) Guide, 16-600888

While the servers listed provide different functions that relate to the phone, the servers are not

necessarily different boxes. For example, DHCP provides file management whereas HTTP

provides application management, yet both functions can coexist on one hardware unit. Use any

standards-based server.

For parameters related to Avaya Server information, see

Communication Manager

Administration

on page 72, and the administration documentation for your call server. For

Server Administration

on page 82.

Caution:

The deskphones obtain important information from the script files on the file server and

depend on the application file for software upgrades. If the file server is unavailable when the

deskphones reset, the deskphones operate based on the default administration and continue

with the call server registration process. Not all features are available. To restore the features,

you must reset the deskphones when the file server is available.

Required network information

Before you administer DHCP, HTTP, and the HTTPS servers, collect the following network

information. If you have more than one gateway (router), HTTP/HTTPS server, or call server in

your configuration, complete the required network information for each DHCP server before you

install the phones.

The phone support specifying a list of IP addresses for a gateway/router, HTTP or HTTPS server,

and Avaya call servers. Each list can contain up to 255 total ASCII characters, with IP addresses

separated by commas with no intervening spaces. Depending on the specific DHCP server, the

phone might support only 127 characters.

When you specify IP addresses for the file server or call server, use either dotted decimal format

(

xxx.xxx.xxx.xxx

) or DNS names for IPv4 addresses. If you use DNS, the value of the DOMAIN

parameter is appended to the DNS names that you specify. If DOMAIN is null, you must use DNS

names that are fully qualified.

Required network information before installation for each DHCP server

• Gateway router IP addresses
• If the HTTP or the HTTPS file server IP addresses, port number, are different from the

default, and the directory path if files are not located in the root directory

• Subnetwork mask
• Avaya call server IP address or addresses
• Phone IP address range

Network requirements

May 2018

Installing and Administering Avaya J169/J179 IP Phone H.323

Comments on this document? [email protected]

Summary of Contents for J169












































































































































































































Search results

Summary of Contents for J169

Reviews:

Related manuals for J169

Brands by name

Popular brands

Avaya J169, Installing And Administering

Search results

Summary of Contents for J169

Reviews:

Related manuals for J169

Brands by name

Popular brands