Procedure
1. Do one of the following:
• Place the bracket on the wall, drill holes, and then drill-in the #8 screws.
• If there is a pre-installed wall plate, place the wall mount bracket over the wall plate. In
this case, you do not need the screws.
2. Attach one end of the Ethernet cable to the 10/100 network port of the phone and the other
end to the wall jack.
3. Attach the phone to the wall mount bracket by inserting the two upper tabs of the wall
mount bracket into the slots on the back of the phone. The lower pair of tabs rest against
Wall mounting Avaya J100 Series IP Phones
May 2018
Installing and Administering Avaya J169/J179 IP Phone H.323
23
