Avaya G430, Manual

Page: 171 / 696

6. Enter
set connect far-end
to specify the equipment at the far-end of the DS1
link, where
far-end
is one of the following values:
• host. Data application (computer or server)
• lineside. Terminal equipment (video multiplexer)
• network. Central office
• pbx. Private communication system (another pbx)
7. If the far-end equipment is specified as
pbx
(set in Step 6), enter
set
interface glare-mode
to specify the glare-handling convention, where
glare-
mode
can be one of the following values:
For non-QSIG calls: For QSIG calls:
• network. If the Branch Gateway is
connected to a host computer and
encounters glare, it overrides the
far-end
• user. If the Branch Gateway is
connected to a public network and
encounters glare, it releases the
circuit
• peerMaster. SLS overrides the other
end when glare occurs
• peerSlave. SLS releases the circuit
when glare occurs
8. If the DS1 link is employed with ISDN, and the glare-handling convention is specified
as
peerMaster
or
peerSlave
for the ISDN link (set in Step 7), enter
set side
side
to specify the glare mode: either a or b.
9. If the DS1 link is employed with ISDN, enter
set country-protocol country-
code
to specify the ISDN Layer 3 country protocol type, where
country-code
is
one of the values in ISDN Layer 3 country codes on page 172:
10. For countries whose public networks allow for multiple ISDN Layer 3 country
protocols for ISDN Primary Rate service, enter
set protocol-version option
to specify the mode (see ISDN Layer 3 country protocols for ISDN Primary Rate
service on page 173).
Verify that the protocol version matches the country specified in
set country-
protocol
(set in Step 9).
11. If the DS1 link is employed with ISDN, enter
set bearer-capability bearer
to set the Information Transfer Rate field of the Bearer Capability IE, where
bearer
is one of the following values:
• 3khz. 3.1 kHz audio encoding
• speech. Speech encoding
12. Enter
set interface-companding type
to set the interface to agree with the
companding method used by the far-end of the DS1 circuit for SLS mode, where
type
is one of the following values:
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 171