Avaya G430 Manual Download

Page: 220 / 696

The message provides the following information:

• A priority (

<34>

in this example) that is calculated based on the syslog facility and the

severity level.

• A header (

Oct 11 22:14:15 host LINKDOWN

in this example), providing the date and

time, the hostname, and a message mnemonic.

• A message (

005ms, SWICHFABRIC-Notification: Port 10/3 Link

in this example),

detailing the milliseconds, the application being logged, the severity level, the message

text, and an Authentication File Identification number (AFID).

Commands used to copy a syslog file

You can copy the syslog file from the Branch Gateway to another location using FTP, SCP, or
TFTP, or locally to a USB mass storage device.

Use any of the following commands to copy a syslog file:

•

copy syslog-file ftp

•

copy syslog-file scp

•

copy syslog-file tftp

•

copy syslog-file usb

For a description of these commands, see

Summary of logging configuration CLI

commands

on page 230 .

For more information about these commands, see the

Avaya Branch Gateways G250 and

G350 CLI Reference

For more information about these commands, see the

Avaya Branch Gateway G430 CLI

Reference

Configuring a log file

About this task

A log file is a file of data concerning a system event, saved in the flash memory. The log files

serve as the system logging database, keeping an internal record of system events.

Procedure

1. Enter

set logging file enable

Gxxx-001(super)# set logging file enable

Done!

2. Optionally, define filters to limit the types of messages received.

System logging

220 Administering Avaya G430 Branch Gateway

October 2013

Comments? [email protected]

Summary of Contents for G430

























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G430

Reviews:

Related manuals for G430

Brands by name

Popular brands

Avaya G430, Manual

Search results

Summary of Contents for G430

Reviews:

Related manuals for G430

Brands by name

Popular brands