Avaya G430, Manual

Page: 174 / 696

Country code Description Possible
Values
Country 13
(Germany) German National PRI
ETSI
invalid
invalid a
b
c
d
ETSI Full message set, including RESTART
No RESTART message
invalid
invalid a
b
c
d
Administering BRI parameters
Procedure
1. Enter
bri slot-address
, where
slot-address
is any permitted port.
The command line prompt changes to sls-bri <slot-address> . If you want to remove
the BRI link from the SLS administration, enter
exit
to leave the second-level bri
context and return to the (super-sls)# context, and then enter
clear bri slot-
address
.
2. Enter
set name name
to identify the user name for the DS1 trunk.
Use the 1-27 character name, as specified on Communication Manager (
add
trunk-group
n ). Type the name string inside double quotes.
3. Enter
set interface glare-mode
to specify the glare-handling convention.
glare-mode
can be one of the following values:
For non-QSIG calls: For QSIG calls:
• network. If the Branch Gateway is
connected to a host computer and
encounters glare, it overrides the
far-end
• user. If the Branch Gateway is
connected to a public network and
encounters glare, it releases the
circuit
• peerMaster. SLS overrides the other
end when glare occurs
• peerSlave. SLS releases the circuit
when glare occurs
4. If the BRI link is employed with ISDN, and the glare-handling convention is specified
as
peerMaster
or
peerSlave
for the ISDN link (set in Step 3), enter
set side
side
to specify the glare mode: either a or b.
Standard Local Survivability (SLS)
174 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com