Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 88 / 106

Take precautions to protect internal components. Electrostatic discharge (ESD) can damage
cards and make them unusable.
To replace the DIMM cards
1. Power down the server, unplug all peripheral devices and Ethernet cables, and
disconnect the AC power.
2. Attach the ESD strap to your wrist and attach the other end to a known grounded
connection.
3. Remove the server cover. For instructions, see Removing and replacing the server
cover on page 74.
4. Locate memory banks 1A AND 1B on the server board. For details, see Figure 24:
Memory DIMM locations on page 88.
Figure 24: Memory DIMM locations
5. Push the clips at each end of the DIMM sockets outward to the open position.
6. Remove all the DIMMs.
7. Holding each DIMM by the edges, remove it from the anti-static envelope.
8. Position the DIMM above the socket and align the small notch in the bottom edge
of the DIMM with the keys in the socket.
9. Insert the bottom edge of the DIMM into the socket.
10. Push down on the top edge of the DIMM until the retaining clips snap into place.
Ensure the retaining clips are fully closed so that the DIMM can make proper contact
with the server board.
11. Install the other DIMM.
Replacing basic chassis components
88 Avaya CallPilot® 600r Server Maintenance and Diagnostics December 2010