manualshive.com logo in svg

Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 33 / 106

Share
Download
Avaya CallPilot 600r Maintenance And Diagnostics Download Page 33

Result: The event log reappears.

6. Click File → Exit.

Result: The Event Viewer closes.

Using TCP/IP diagnostic tools

This section describes the following TCP/IP diagnostic tools that are available for the network
adapter:

• ipconfig

• ping

• tracert

• arp

• nbtstat

• netstat

These utilities help you to verify network connectivity, test the network interface, and isolate
any configuration problems.

The ipconfig command

The ipconfig command displays IP configuration information.

ipconfig default

If you run the command without flags, the ipconfig command displays the IP address, subnet
mask, and default gateway for each adapter bound to TCP/IP.

ipconfig command syntax

The ipconfig command uses the following syntax:

ipconfig /[ ]

Using TCP/IP diagnostic tools

Avaya CallPilot® 600r Server Maintenance and Diagnostics

December 2010     33

Summary of Contents for CallPilot 600r











































































































Reviews:

No comments