Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 58 / 106

Figure 9: Multimedia monitor screen
Note:
For an explanation of the channel states, see the CallPilot Manager online Help.
3. Do one of the following:
If you want to stop or start Then
all of the channels associated with a
DSP select the Select All check box to the left
of the DSP that you want to stop or
start.
Repeat this step for each DSP.
only one or several channels that are
associated with a DSP select the check box for each channel
that you want to stop or start.
4. Click Courtesy Stop or Start, as required.
Result: If you clicked Courtesy Stop or Start, you are asked to confirm the Courtesy
Stop or Start. Click OK.
The selected channels change to off-duty or on-duty status, according to the action
you chose.
Note:
If the buttons are not available, wait a few seconds for the screen to refresh.
Monitoring multimedia hardware
58 Avaya CallPilot® 600r Server Maintenance and Diagnostics December 2010