Avaya CallPilot 600r Maintenance And Diagnostics Download Page 95

Page: 95 / 106

Chapter 9: Maintaining the BIOS and system

board firmware

In this chapter

Configuring the 600r BIOS and firmware

on page 95

600r server display non-default CMOS settings

on page 98

Using the System Setup Utility logs

on page 99

Maintaining the onboard video and network interface

on page 101

Configuring the 600r BIOS and firmware

Overview

The Basic Input/Output System (BIOS) of your 600r server is Flash ROM-based code. Upgrade
or reconfigure the BIOS using the utilities on the Avaya CallPilot® Image DVD. The utility
programs write updated code to the Flash ROM chips.

Upgrading or reconfiguring the BIOS is a three-step process:

1. Boot up from the Image DVD and display the Image Menu.

2. Update the BIOS firmware.

3. Update the FRU/SDR firmware.

Important:

You must complete all the steps, in the correct order, for your system to function properly.

Avaya CallPilot® 600r Server Maintenance and Diagnostics

December 2010 95

Summary of Contents for CallPilot 600r











































































































Search results

Summary of Contents for CallPilot 600r

Reviews:

Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 95 / 106

Search results

Summary of Contents for CallPilot 600r

Reviews: