Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 75 / 106

Caution:
Risk of equipment damage
Take precautions to protect internal components. Electrostatic discharge (ESD)
can damage boards and make them unusable.
Power down the server, unplug all peripheral devices and Ethernet cables, and
disconnect the AC power.
2. Attach the ESD strap to your wrist and attach the other end to a known grounded
connection.
3. While holding in the blue button at the top of the chassis, slide the top cover back
until it stops.
Figure 15: Server cover
4. Lift the cover straight up to remove it from the platform.
To replace the server cover
1. Place the cover over the chassis so that the side edges of the cover sit just inside
the chassis sidewalls. The front of the cover is about an eighth of an inch from the
sheet-metal at the front of the chassis.
2. Press down slightly on the server cover behind the DVD-ROM drive area and slide
the cover forward until it clicks into place.
3. Plug in the peripheral devices and Ethernet cables, connect the AC power cords,
and restart the server.
Removing and replacing the processor air duct
You must remove the air duct to access the processor assembly and the two system fans.
Because the processor air duct channels the airflow within the chassis, reinstall the air duct
before installing the server cover.
Removing and replacing the processor air duct
Avaya CallPilot® 600r Server Maintenance and Diagnostics December 2010 75