Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 40 / 106

Parameter Description
this parameter, nbtstat prints the current configuration
information once.
To run the nbtstat command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
2. At the Command prompt, type nbtstat with the required parameters.
3. Press Enter.
Result: The system runs the nbtstat utility.
4. Type Exit to exit the Command Prompt window and return to Windows.
The netstat command
The netstat command displays current TCP/IP network connections and protocol statistics.
Netstat command syntax
The netstat command uses the following syntax:
netstat [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]
netstat command parameters
Table 14: netstat command parameters
Parameter Description
-a Displays all connections and listening ports.
-e Displays Ethernet statistics. You can combine this with the -s
option.
-n Displays addresses and port numbers in numeric form.
-s Displays statistics for each protocol.
Using Windows online diagnostic tools
40 Avaya CallPilot® 600r Server Maintenance and Diagnostics December 2010