Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 86 / 106

Figure 22: Removing DVD-ROM drive assembly from chassis
9. Press downward on the side of the bracket where the blue captive screw is attached
to release the DVD-ROM drive from the drive bracket.
10. Remove the two small screws that attach the backplane to the drive and put them
aside to install the new DVD-ROM.
11. Remove the DVD-ROM drive from the carrier.
12. Attach the backplane to the replacement drive, using the screws removed in step
9. For details, see A in Figure 22: Removing DVD-ROM drive assembly from
chassis on page 86.
13. Install the new DVD-ROM drive in the carrier.
a. Line up the pins on each side of the bracket (two on each side) with the
holes in the drive and set the replacement DVD drive into the drive
bracket. Push gently on one side of the bracket to push the pins into
place.
b. Screw the carrier shut with the three screws.
c. Reconnect the power and ribbon cables.
Replacing basic chassis components
86 Avaya CallPilot® 600r Server Maintenance and Diagnostics December 2010