Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 87 / 106

Figure 23: Attaching DVD drive to bracket
14. With the black drive carrier handle in the fully open position, slide the drive assembly
back into the chassis.
15. Slide the DVD-ROM drive assembly into the chassis.
16. Tighten the blue captive screw at the left side of the drive assembly. For details, see
A in Figure 23: Attaching DVD drive to bracket on page 87.
17. Attach the drive power and data cables at the rear of the drive. After the cables are
firmly installed, the cable retention clips lock into place.
18. Replace the server cover. For instructions, see Removing and replacing the server
cover on page 74.
19. Take off the ESD strap.
20. Replace the front bezel.
21. Plug in the peripheral devices and Ethernet cables, connect the AC power cords,
and restart the server.
Replacing memory DIMMs
There are two Dual Inline Memory Modules (DIMMs) installed on your server. You must replace
the memory DIMMs with those in the Avaya replacement pack. Avaya does not support more
than two DIMM modules in the 600r server.
Caution:
Risk of equipment damage
Replacing memory DIMMs
Avaya CallPilot® 600r Server Maintenance and Diagnostics December 2010 87