manualshive.com logo in svg

Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 101 / 106

Share
Download
Avaya CallPilot 600r Maintenance And Diagnostics Download Page 101

Maintaining the onboard video and network interface

Network card failure

The network cards are integrated into the server board. If the network interface fails, the server
must be replaced.

Video card failure

The video card is integrated into the server board. If the video card fails, you must replace the
server.

Indicators for video card failure

If the monitor appears to function but no display is visible, look for the following indicators of a
video card malfunction:

• Brightness and contrast are set at normal level.

• The server is powered on, and one long beep is followed by two short beeps.

• The DVD combo drive light goes on when the server is powered up, but no display is

visible on the monitor.

• The DVD combo drive light comes on when you type dir D: and press Enter, but no display

is visible on the monitor.

Maintaining the onboard video and network interface

Avaya CallPilot® 600r Server Maintenance and Diagnostics

December 2010     101

Summary of Contents for CallPilot 600r











































































































Reviews:

No comments