Autonics AiC-D-20LA, User Manual

Page: 96 / 116

10 Program Instructions
96 © Copyright Reserved Autonics Co., Ltd.
10.2.4 OPT (output port ON pulse)
It turns the set output port ON during the set ON time.
Instruction DATA
OPT Instruction On time Output port Next step

On Time: Set the ON time for output port.
Setting range is 1 to 10,000msec.

Output port: Set the output port number.
For more information about output port number,
refer to ‘8.2.2General Output (AiC-D: 10, AiC-D-B: 9)’.

Next step
 ON: It moves to the next step regardless of output operation.

OFF: It turns the set output port ON during the set ON time. After the time, it moves
to the next step.
10.2.5 CMP (compare output)
It outputs trigger pulse for the set period.
Instruction DATA
CMP
Instruction Pos Port Mode Width Period
For more information, refer to ‘8.2.1.3Compare1, Compare2’.

Position
: Set the trigger position of output signal.
Setting range is 1 to 10,000 msec

Compare Port
: Set the compare output port number.

Compare Mode
: Set the compare output mode.

Pulse Width
: Set the output pulse width.
Applied when compare mode is 3.
Setting range is 1 to 10,000 msec.

Pulse Period
: Set the output pulse period.
Applied when compare mode is 3.
Setting range is 1 to 2,147,483,647.