Autonics AiC-D-20LA, User Manual

Page: 7 / 116

Safety Considerations
© Copyright Reserved Autonics Co., Ltd. vii

When connecting the power input, use AWG 18(0.75mm 2 ) cable or over.

Brake is non-polar. When connecting the brake, use AWG 24 (0.2mm 2 ) cable or over.
Failure to follow this instruction may result in fire or malfunction due to contact failure.

To use the motor safely, do not apply external force to the motor.

It is recommended to use STOPPER for the vertical load.

Install over-current prevention device (e.g. the current breaker, etc.) to connect the
driver with power.
Failure to follow this instruction may result in fire.

Check the control input signal before supplying power to the driver.
Failure to follow this instruction may result in personal injury or product damage by
unexpected signal.

Install a safety device to maintain the vertical position after turn off the power of this
driver.
Failure to follow this instruction may result in personal injury or product damage by
releasing holding torque of the motor.

Use the unit within the rated specifications.
Failure to follow this instruction may result in fire or product damage.

Use dry cloth to clean the unit, and do not use water or organic solvent.
Failure to follow this instruction may result in fire or electric shock.

The driver may overheat depending on the environment.
Install the unit in the well ventilated place and forced cooling with a cooling fan.
Failure to follow this instruction may result in product damage or degradation by heat.

Keep the product away from metal chip, dust, and wire residue which flowing into the
unit.
Failure to follow this instruction may result in fire or product damage.

Use the designated motor only.
Failure to follow this instruction may result in fire or product damage.
The above specifications are subject to change and somd models may be discontinued
without notice.
Be sure to follow cautions written in the instruction manual, user manual and the
technical descriptions (catalog, website).