Autel MaxiCOM Ultra Lite User Manual Download

Page: 21 / 143

Button

Name

Description

MaxiViewer

Provides a quick search for supported functions
and/or vehicles. See

MaxiViewer

on page 122.

MaxiVideo

Configures the unit to operate as a video scope
device by connecting to an imager head cable for
close vehicle inspections. See

MaxiVideo

on page

124.

User
Feedback

Allows you to submit feedback related to this
product. See

User Feedback

on page 130.

3.1.2 Page Control and Navigation Menu

Operations of the Navigation menu at the bottom of the screen are described in the table
below:

Table 3-2

Page Control and Navigation Menu

Button

Name

Description

Page Control

Indicates the location of the current screen.
Swipe screen left or right to view previous or
next screen.

Back

Returns to the previous screen.

Home

Returns to the MaxiCOM Job Menu.

Android Home

Returns to the Android system Home screen.

Recent Apps

Displays a list of currently running applications.
Tap an app icon to launch. Remove an app by
swiping it to the right.

Split Screen

Tap icon to display a split screen.

Browser

Launches the Google Chrome browser.

Camera

Tap  to  launch  camera.  Press  and  hold  to
capture  a  screenshot  of  the  display  screen.
Saved  files  are  stored  in  the  Data  Manager
application for later review. See

Data Manager

on page 84.

Summary of Contents for MaxiCOM Ultra Lite
















































































































































Search results

Summary of Contents for MaxiCOM Ultra Lite

Reviews:

Related manuals for MaxiCOM Ultra Lite

Brands by name

Popular brands

Autel MaxiCOM Ultra Lite, User Manual

Search results

Summary of Contents for MaxiCOM Ultra Lite

Reviews:

Related manuals for MaxiCOM Ultra Lite

Brands by name

Popular brands