124
16
MaxiVideo
The MaxiVideo application configures the MaxiCOM Diagnostics Device to operate as a
digital video scope by simply connecting the tablet to a MaxiVideo Camera. This function
allows you to examine difficult-to-reach areas normally hidden from sight, with the ability
to record digital still images and videos, which offers you an economical solution to inspect
machinery, facilities, and infrastructure in a safe and quick way.
WARNINGS:
Follow these instructions to reduce the risk of injury from electric shock, entanglement
and other causes and prevent tool damage.
Do not place the imager head into anything or anywhere that may contain a live electric
charge or moving parts, which increases the risk of electric shock or entanglement
injuries.
Do not use the imager head cable to modify surroundings, clear pathways or clogged
areas.
When inspection is completed, carefully withdraw the imager head from the inspected
area.
The imager head cable is waterproof to a depth of 3 m (10'). Greater depths may cause
leakage into the imager head cable, electric shock or tool damage.
The working temperature of the imager head is between 32 °F (0 °C) and 113 °F
(45 °C).
Check-Ups:
FOR AUTOMOBILES
: Ensure the automobile is not running during inspection to avoid
damage from hot metal and liquid under the hood. Do not get oil or gasoline on the
imager head.
FOR PIPES
: If you suspect that a metal pipe may carry electric charge, have a
qualified electrician to check the pipe before inspecting it.
FOR WALLS
: Before you inspect the inside of a wall with the imager head, turn off the
circuit breaker to the house.
WORKING AREA
: Ensure the working area has sufficient light.
16.1 Additional Accessories
The MaxiVideo Camera and its fittings are the additional accessories. Both sizes (
8.5 mm
and 5.5 mm
) of the imager head are optional and available for purchase along with the
standard MaxiCOM tool kit.
