33
B. List Tab Page
Figure 4-11
List Tab Page
The
Auto Scan
function performs a comprehensive scan of all the systems in the vehicle
ECU to locate faults and retrieve DTCs. Tap
Fault Scan
to start.
Systems with no faults
detected will appear in green; systems containing faults will appear in orange.
Column 1
— displays system numbers
Column 2
— displays scanned systems
Column 3
—
displays scan results
-!-: Indicates that the scanned system may not support the code reading function, or
there is a communication error between the tablet and the control system.
-?-: Indicates that the vehicle control system has been detected, but the tablet cannot
access it.
Fault | #: Indicates there is/are fault code(s) present; "#" indicates the quantity of
detected faults.
Pass | No Fault: Indicates the system was scanned and no fault has been detected.
Not Scanned: Indicates the system has not been scanned.
No Response: Indicates the system has not received a response.
To perform an Auto Scan
Using topology for BMW as an example:
1.
Tap the
Diagnostics
application button on the MaxiSys Job Menu. Choose the
corresponding vehicle information and enter the Vehicle Diagnostics page.
