Autel MaxiCOM Ultra Lite User Manual Download

Page: 129 / 143

123

Figure 15-2

MaxiViewer Screen Sample 2



To search by the functions

1. Tap the

MaxiViewer

application on the MaxiCOM Job Menu. The MaxiViewer

screen appears.

2. Tap the tool name on the top-left to drop down the tool list, then choose the one

you want to search.

3. Enter the function you want to search in the top-right search box. The screen will

display all vehicles that support this function, along with information such as the
vehicles' year, system, capacity, type, function, sub-function, and version.

NOTE

Partial search is supported: type in any part of the function-related keywords to find all
available information.

Summary of Contents for MaxiCOM Ultra Lite
















































































































































Search results

Summary of Contents for MaxiCOM Ultra Lite

Reviews:

Related manuals for MaxiCOM Ultra Lite

Brands by name

Popular brands

Autel MaxiCOM Ultra Lite, User Manual

Search results

Summary of Contents for MaxiCOM Ultra Lite

Reviews:

Related manuals for MaxiCOM Ultra Lite

Brands by name

Popular brands