63
Figure 5-3
List Screen
5.1.2 Scan System Faults
Once the vehicle system listing or Topology mapping has been completed, tap the
Fault
scan
button at the bottom of the System list, Topology or List screen to find the faults in
the vehicle systems.
1)
On the System list screen, tap the
Fault scan
button at the bottom. After scanning,
a system with identified faults will display in red, with the number of faults displayed
on the right. The number of total faults will appear on the top.
Figure 5-4
Fault Scan on System List Screen Sample 1
