47
Column 2
— displays the execution status such as Completed or Activated or may
display live data values that correspond to the special function
Column 3
— displays the measurement units of the live data
Tap a function button to perform the selected function or exit the function.
4.10 Programming and Coding
Since the introduction of OBDII and leading up to modern hybrids and EVs, hardware and
software technologies in cars have been advancing at an exponential rate. Updating
software may be the only way to fix the following issues:
Drivability
Fuel Efficiency
Power Loss
Fault Codes
Durability of Mechanical Parts
The P
rogramming and Coding function is used to “re-flash” the vehicle control modules,
which allows you to update the computer software of the vehicle to the latest version, as
well as to reprogram adaptive data of certain components after making repairs or
replacements.
NOTE
The programming function applies only when the vehicle is connected to a VCI, which
serves as a PassThru interface to establish communication and transfer data to the
vehicle's ECU.
Available programming or coding operations vary by test vehicle. Only available
operations display in the tablet menu.
There are two general types of programming operations:
A. Coding
— also known as
Teach-in Program
, or
Component Adaptation
, is used to
reprogram adaptive data for vehicle control modules after repairs or replacements of
vehicle parts.
B. Reprogramming
— downloads the latest version of software from the online server
database via the Internet access (this procedure is done automatically when the tablet
is connected to the Internet, so there is no need to check for software updates yourself),
and reprograms the newest version into the vehicle's ECU.
NOTE
Ensure that the tablet is connected to a stable Internet access before applying the ECU
programming function, so that the tablet is able to access the vehicle manufacturer's
server for update service.
