manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 125 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 125

Features

Console setup. If you have DSS or Auto Dial buttons
and your system is programmed for One-Touch

Transfer, see “To Transfer to an Inside Extension Using

One-Touch Transfer” in this section. If you do not
have DSS or Auto Dial buttons or your system is not set
up for One-Touch Transfer, see “To Transfer to an

Inside Extension without Using One-Touch Transfer” in

this section.
Whether the number accepting the transfer is an
extension or an outside number. See “To Transfer to

an Inside Extension Using One-Touch Transfer” and
“To Transfer to an Inside Extension without Using
One-Touch Transfer” for inside transfers, and “To

Transfer to an Outside Number” for outside transfers.

Features chosen to handle unsuccessful transfers. If
the person receiving the transferred call is on another
call or not in, you can use Camp-On, Barge-in, or Park
and Paging. See “Handling an Unsuccessful

Transfer” in this section.

Transfer

4-57

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments