manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 33 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 33

About Your Direct-Line Console

Understanding DSS Button Lights

A DSS button has a red light beside it that provides the
following information. Be sure the Message Status light is off
when checking this information.

Red Light

Off

Off

Off

Off

On

On

On

On

Fast flashing

Slow flashing

Slow flashing

NOTE:

Button

Meaning

Extensions

Pool

Line

Group Page and Page All

Extensions

Pool

Line

Group Page and Page All

Extensions

Extensions

Line

Person is not on the telephone and is
not using Do Not Disturb.

At least one line in the pool is available.

This line is available.

These features are not in use.

Person is on the phone or is using Do
Not Disturb.

All lines in the pool are busy.

This line is in use.

These features are in use.

This person 

IS 

calling you.

A call you transferred to this extension

is returning to you.

A call is ringing on this line.

When an extension button has a dial-out code assigned
to it, the button’s light is always off.

Lights

1-21

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments