manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 99 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 99

Features

To Use Leave Message

When a call is unanswered or busy (you are listening to

ringing or busy tone):

1. Press  Feature.

2. Select 

Leave Msg [LvMsg] 

or dial 

25.

If this feature is not displayed, press  More.

3. Read status of message on display

■ 

Message Sent To. 

. . if message was

delivered.

■ 

Message B

OX 

Full 

if co-worker’s message

box is full.

■ 

Cannot Send Message 

if message was not

delivered for any other reason.

Send/Remove Message

The Send/Remove Message  button toggles between
sending and removing operator messages. Use the Message
Status button to determine if an operator message is
currently present.

Press the programmed button labeled Send/Remove
Message  to toggle another extension’s message light or

leave a message on a display telephone.

The Send/Remove Message  button will turn off a co-worker’s
message light and cancel the operator message delivered to
a display telephone, if the only message was from an
operator. You can make sure you do not turn off a message

Messaging

4-31

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments