manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 95 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 95

Features

Headset Features

If you want to use a headset, you should have two feature
buttons programmed on your console:  Headset Status,  to

turn the headset on and off, and Headset Hang Up, to
disconnect calls. (However, only Headset Hang Up is
required. ) You do not need to program a Headset Status
button unless you are going to use both the headset and the
handset. You can program  Headset Status  but the Headset
Hang Up button must be programmed by your system
manager.

You can program the console with Headset Auto Answer to

deliver calls automatically to the headset, so that you do not
need to press line buttons to answer calls. As each call
comes in, you hear a tone and you can begin speaking after
it.

Headset/Handset Mute  temporarily turns off the microphone
in your headset or handset so that you can talk with someone
in your office without being heard by a caller.

To Program Headset Feature Buttons

1. Label buttons to be programmed as  Headset Status,

Headset Auto Answer,  or Headset/Handset Mute .

2. Press  Menu.

Headset Features

4-27

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments