manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 97 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 97

Features

NOTE:

■ 

Automatic call delivery cannot be activated during

a call. You must complete the call before pressing
Headset Auto Answer button.

■ 

When using Headset Auto Answer and sharing a

line with other operators, use Privacy to prevent
other operators from answering the same calls.

■ 

To delete a  Headset Status  button from a

programmed line button, that is to program over
this button, the green light next to  Headset Status
must be off.

To Turn off the Headset

To turn off the headset during a call:

■ 

Headset/Handset Mute.  Press once to stop your

voice transmission through the headset. Press again
to resume.

■ 

Speaker.  Press once to transfer the call from your

headset to the speakerphone. Press again to return
the call to the headset.

If the call is disconnected while the speakerphone is in use,

automatic call delivery turns off. You must press  Speaker
once more to turn it on again.

Headset Features

4-29

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments