AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 120

Page: 120 / 152

Features

To Clear a Missed Reminder

When a reminder is missed, the green light next to the button
flashes as an indication.

2 .

Press the programmed Missed Reminder button.

The green light next to the button goes steady, to indicate that you
are in missed reminder mode. The display shows the time, name,
and extension of the last missed reminder.

Press the programmed Reminder Cancel button, or
press the programmed Feature button and dial

✱

81.

The display shows

Event deleted.

If there is more than one missed reminder, press the
More button or press the Feature button and dial

28.

Repeat Steps 2 and 3 until the display reads

Rmdrs.

Press the programmed Missed Reminder button.

The green light flashes if not all missed reminders have been

deleted.

4-52

Reminder Service

Summary of Contents for Merlin Legend MLX-20L

























































































































































Search results

Summary of Contents for Merlin Legend MLX-20L

Reviews:

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 120 / 152

Search results

Summary of Contents for Merlin Legend MLX-20L

Reviews: