manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 121 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 121

Features

System Speed Dial

Three-digit System Speed Dial codes (from 600-729) can be
assigned to outside numbers you and your co-workers call
often. You dial these codes instead of the entire outside

number sequence. Record your codes on the System Speed
Dial card in the card tray under your phone. You can also
program line buttons with System Speed Dial codes; just
press the line button to reach the telephone number.

If your company has programmed the System Directory, it

contains the same numbers associated with System Speed

Dial Codes. The codes are simply the way to access your

System Directory. You can access the System Directory
through the Display menu.

NOTE:

System Speed Dial must be programmed for your system,
and you must have codes and numbers from your system
manager.

System Speed Dial

4-53

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments