manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 98 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 98

Features

Messaging

If co-workers cannot be reached, you can use either Leave
Message or Send/Remove Message to alert them that they
have messages waiting. Use Leave Message by choosing it

from the menu on your display; use Send/Remove Message to

leave an operator message by pressing a programmed

Send/Remove Message  button or dialing a feature code.

Use the Posted Message button to let co-workers with
display telephones know when you are unavailable. See
“Posted Message” later in this section.

Co-workers can also leave messages on your display. For
more on receiving messages, see the MLX-10D, MLX-28D,

and MLX-20L Display Telephones User’s Guide.

Leave Message

Use Leave Message to leave a display message for co-

workers with display phones.

Your co-worker’s message light goes on after you leave the
message. (To use Leave Message you must be on a call

listening to ringing or a busy tone. ) If your co-worker does not
have a display, you will see 

Cannot Send Message 

on your

display. In this case, use Send/Remove Message instead.

4-30

Messaging

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments