manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 64 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 64

Quick Start

4. Make the call to the next extension or outside number.

If you make a dialing error while adding a participant to a
conference, you must hang up and start dialing that party over.

5. Confirm participation:

■ 

If the person is available, announce the

conference and press  Conf.

You and all participants are connected. The display shows
the number of people on the call.

■

If the person is unavailable, hang up and return

to Step 4.

6. Press  Conf  again to add another person.

You are separated from the conference while you add the next
person, but the participants can still talk. The display prompts you to

add another participant.

7. Repeat Steps 3 through 5.

8. While on a conference:

■ 

Disconnect yourself without ending the

conference by pressing  Hold.  (Do not use

Drop  to disconnect a participant when the

conference is on hold or to disconnect-yourself
from a conference you initiated.)

■ 

Rejoin the conference by pressing the line

button for any conference participant.

■

Disconnect a participant by pressing  Drop  and

then pressing the participant’s line button.

9. To end the conference, hang up.

2-14

Setting Up a Conference

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments