manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 115 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 115

Features

To Use Park and Paging

NOTE:

You can only park one call at your extension at a time.

1. Park the call.

To park the call at your extension, do  one of the
following:

■ 

Press  Park.

■ 

Press  Transfer,  dial your extension, and press

Transfer  again.

■ 

Press  Feature  and select 

Park.

To park the call at a Park Zone, do one of the following:

■ 

Press Park—(  zone ).

■ 

Press  Transfer,  dial the Park Zone extension,

and press  Transfer  again.

■ 

Press the DSS button for the Park Zone. If

manual completion is programmed, hang up.

2. Set up page.

■ 

For Speakerphone Page, press the DSS button,

or press Group Page—(  name ) or Page All
button, or dial the extension for Group Page or
Page All.

■ 

For Loudspeaker Page, press  Loudspeaker

Page  button or press  Feature  and select

LoudspkrPg [LdsPg].

If necessary, dial the code for the page zone.

3. Announce the call and extension where the call is

parked.

P a r k

4-47

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments