manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 117 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 117

Features

To clear a Missed Reminder message, press Reminder
Cancel  or dial the feature code. You cannot set or cancel a
reminder when the Missed Reminder light is steady.

NOTE:

The system may be programmed to cancel all
outstanding reminders at a preset time every day.

English-language operation uses a 12-hour clock format.
French- and Spanish-language operation use a 24-hour

clock format.

To Program Reminder Service Buttons

1.

2.
3.

4.
5.

6.
7.

8.

Label the button to be programmed as Reminder Set,
Reminder Cancel, or Missed Reminder.
Press  Menu.

Select 

Ext Program [Prog].

If this feature is not displayed, press More.

Select 

S t a r t .

Press the button you labeled Reminder Set, Reminder
Cancel, or Missed Reminder.
Select 

ListFeature [List].

Select 

Reminder [Rmind].

If this feature is not displayed, use 

FindFeature [Find] 

or press

More.

Select 

Set [Set], Cancel [Cancl], 

or

Missed [Missd].

Reminder Service

4-49

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments