manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 63 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 63

Quick Start

Setting Up a Conference

You can conference up to five people on the same
conversation; one or two outside numbers and up to three
internal extensions, including your own.

1.
2 .

3.

Make a call to the first extension or outside number.
Press Conf after the person answers and you have

announced the call.

The green light next to the line button flashes, signaling that the call

is on hold for the conference; the display prompts you to add another

person.

If the next call is an inside extension, press an ICOM or

SA button; if it is an outside number, press an SA or
line button.

If any SA buttons are available, the system automatically selects

one.

CAUTION:

If the system selects an SA Voice button, you

hear a beep instead of ringing after you dial

the extension to be included in the

conference. If the call is not answered, your
conversation with other parties on the
conference is broadcast on that extension’s

speakerphone. You must be sure to drop an

unanswered extension on an  SA Voice button
to prevent an unintentional broadcast from

happening.

Setting Up a Conference

2-13

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments