manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 57 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 57

Quick Start

NOTE:

A person with a speakerphone can enable voice-
announced calls even if they are on the handset. See the

MLX- 10D, MLX-28D, and MLX-20L Display Telephones

User’s Guide for more on Voice Announce.

To Make an Outside Call

1. If the red light next to the line or  SA button to be used

for the call is not on, press the button.

2. Lift the handset, press  Speaker,  or use headset.
3. Listen for a dial tone, dial the telephone number

(include the dial-out code, if necessary), or press the
programmed outside Auto Dial button.

4. If you are making the call for a co-worker, continue with

these steps to transfer the call:

a. When the outside party answers, announce the

call.

b. Press  Transfer  to put the outside call on hold.

c. Press the DSS or Auto Dial button for your co-

worker’s extension, or dial the extension.

d. When your co-worker answers, announce the

call.

e. Hang up.

The two parties are connected automatically.

Making a Call 

2 - 7

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments